Saturday, July 16, 2011
Friday, March 4, 2011
Friday, February 11, 2011
Thursday, February 3, 2011
Tuesday, February 1, 2011
Saturday, January 29, 2011
MASTER PHONE MT510
MASTER PHONE MT510
UNIRISE25_GEMINI_PCB01_GPRS_MT6225_S00.LBSCS03_8_1 2_1_0T08M0718_M501C(20090612)
Thursday, January 27, 2011
ztc flash files CPU: 66007001 Flash: NOR_ST_M58WR064KT
ztc flash files.
CPU: 66007001 Flash: NOR_ST_M58WR064KT
Note : not same like nokia copy 6120
Saturday, January 22, 2011
How To Remove Touchscreen From Phone Using gpgdragon
How To Remove Touchscreen From Phone Using gpgdragon
how to read (phone code.power on password )by GPGDragon
how to read (phone code.power on password )by GPGDragon
Friday, January 21, 2011
Thursday, January 13, 2011
World First spd detect using comp rx,tx,Ground
World First spd detect using comp rx,tx,Ground
nitializing...
DA_LIB_VER_2.5.1.2
It is sensing the pinout fast...
RXD=3 TXD=4
Connecting...
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700000000000_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L/WT6226A Flash: NOR_TV00570002xDGB
Set FLASH Parameters...
Settings have been completed!
Connect and search Security Code...
Privacy protect: 0103
PhoneLock: 0103
Theft proof: 030509
Done.
nitializing...
DA_LIB_VER_2.5.1.2
It is sensing the pinout fast...
RXD=3 TXD=4
Connecting...
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700000000000_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L/WT6226A Flash: NOR_TV00570002xDGB
Set FLASH Parameters...
Settings have been completed!
Connect and search Security Code...
Privacy protect: 0103
PhoneLock: 0103
Theft proof: 030509
Done.
Spreadtrum imei change 100%
Spreadtrum imei change 100%
1- open your softwre and connect box
2- go to spreadtrum
3- select port
4- read flash
5- select imei
6- enter new imei code
7- enter original imei (back of your fone)
8- select readed flash file
9- and click start
your dispay show it
analysis the file...
imei change complete, save as
your readed flash file location
u have created imei file the name of new imei
10- select write flash
11- and write imei file
2- go to spreadtrum
3- select port
4- read flash
5- select imei
6- enter new imei code
7- enter original imei (back of your fone)
8- select readed flash file
9- and click start
your dispay show it
analysis the file...
imei change complete, save as
your readed flash file location
u have created imei file the name of new imei
10- select write flash
11- and write imei file
6253 after format no signal
6253 after format no signal
DA_LIB_VER_2.5.1.2
It is sensing the pinout fast,please hold on the phone Power key
RXD=9 TXD=7
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6253, HardwareVer:8A00, SoftwareVer:8A02
Loading boot...
INT_SYSRAM_BOOT test completed.
Nor Flash ID: 0098009E00000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: 6253_C85K_WLT_ML_A_V01
Changing baudrate to 921600...
Done.
Reading full Flash...
All Done.
IMEI change it same like befroe
gfive N90 flash file
gfive N90 flash file
BB:6253, HardwareVer:8A00, SoftwareVer:8A02
Project ID: L5BMM03.9.52.1.4T11M0913_M700
Project ID: L5BMM03.9.52.1.4T11M0913_M700
Sigmatel NXP CPU
Sigmatel NXP CPU
igmatel 5610+
CPU NXP 5231EL
Problem Dead
Boot ok try to read flash but sw asking 4 adress
CPU NXP 5231EL
Problem Dead
Boot ok try to read flash but sw asking 4 adress
but now you can set the size is 0X01000000 click the start,will read the full flash
E4 fist time formant ok set
ist time formant ok set
nitializing...
DA_LIB_VER_2.4.4.9
It is sensing the pinout fast,please hold on the phone Power key
RXD=6 TXD=4
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 0098000300000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: E400-PK.FM.V1.1
Changing baudrate to 921600...
Done.
Formating Flash...
AutoFormat address: start=0x00E00000, size=0x001F0000
All Done
nitializing...
DA_LIB_VER_2.4.4.9
It is sensing the pinout fast,please hold on the phone Power key
RXD=6 TXD=4
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 0098000300000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: E400-PK.FM.V1.1
Changing baudrate to 921600...
Done.
Formating Flash...
AutoFormat address: start=0x00E00000, size=0x001F0000
All Done
Subscribe to:
Posts (Atom)